Call Waiting; Speed Dialing - 3Com VCX Manual

Business telephone
Hide thumbs Also See for VCX:
Table of Contents

Advertisement

format:

Call Waiting

the current call on hold.
Access button for the call you want.

Speed Dialing

To transfer a call to another subscriber's voice mail:
1)
While on a call, press Feature+441.
The Display Panel shows the following prompt:
Transfer VMail Number:
2)
Enter the extension of the subscriber whose mailbox will receive the call.
The caller hears the mailbox greeting of the target subscriber but the subscriber's
telephone does not ring.
Alternatively, you can use the following procedure:
3)
While on a call, press Transfer.
4)
Enter the transfer to another subscriber's voice mail feature code in the following
*441*<extension>
For <extension>, you can either enter the telephone extension of the recipient, press a
speed dial button mapped to that extension, or press a bridge line button (Basic phones
do not support bridging) mapped to that extension.
5)
Press the Transfer button again, then hang up.
For example, extension 1001 calls extension 1000. Extension 1000 wants to transfer
the call to the voice mailbox of extension 1002. In this case, extension 1000 performs
the following steps:
Presses Transfer.
Enters *441*1002.
Presses Transfer.
Hangs up.
Extension 1001 now hears the voice mailbox greeting for extension 1002 but extension
1002 does ring.
The Call Waiting feature in the VCX User Interface allows you to select a ring tone, or to
hear a beep sound in the handset/headset, or to disable the ringer (but flash the MWI)
on your current call to let you know that another call has arrived on another access line.
1)
When you hear a ring tone or see the MWI flashing, press the Hold button to put
2)
Press the Access button for the incoming call.
3)
To toggle between the two calls, put the current call on hold and then press the
This section describes the following types of speed dialing:
One-Touch Speed Dials — With this type of speed dialing, a telephone number
(internal or external) is mapped to a dedicated Access button on your phone.
Pressing the button dials the call.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VCX and is the answer not in the manual?

Questions and answers

Table of Contents