Personal Speed Dial Access Buttons; Logging Out - 3Com VCX Manual

ACD Groups and Bridged Line Calls
Message Waiting Indication and Bridged Line Calls

Personal Speed Dial Access Buttons

Logging Out

A primary or a secondary telephone can belong to an ACD group.
If a primary telephone is a member of an ACD group, a call coming to the ACD group
rings on an SA line on the primary phone. A secondary telephone cannot receive an
ACD group call directed to a primary phone.
A secondary telephone displays the Message Waiting Indication (MWI) of the primary
telephone (or telephones). The display panel on the secondary telephone shows the
total number of new and old messages from both the primary telephone and secondary
telephone mailboxes when the telephone is in an idle state.
Pressing the MSG button lists the mailboxes. You can press Up and Down arrow keys
to select a mailbox, then press the MSG button again to connect to that mailbox.
The VCX User Interface allows you to set up personal speed dial access buttons using
two method; by assigning the Personal Speed Dial feature to an access button and by
assigning the Call feature to an access button.
Using the Personal Speed Dial feature provides up to six (Model 3102) personal speed
dial numbers that you can assign. Using the Call feature provides an additional nine
personal speed dial numbers you can assign.
To log out of the VCX User Interface, follow these steps:
1) From any screen, click the Log Out button just above the copyright notice.
The Login screen appears.
2) Close your web browser.