Connecting An Rs-232 Interface - Motorola symbol ds9808 Reference Manual

7 - 2 Symbol DS9808 Product Reference Guide

Connecting an RS-232 Interface

Connect the digital scanner directly to the host computer.
Serial Port
Connector to Host
RS-232 Direct Connection
Figure 7-1
NOTE Interface cables vary depending on configuration. The connectors illustrated in
only. The connectors may be different than those illustrated, but the steps to connect the digital scanner
are the same.
Attach the modular connector of the RS-232 interface cable to the cable interface port on the digital scanner
1.
(see Installing the Interface Cable on page
Connect the other end of the RS-232 interface cable to the serial port on the host.
2.
Connect the power supply to the serial connector end of the RS-232 interface cable. Plug the power supply
3.
into an appropriate outlet.
Select the RS-232 host type by scanning the appropriate bar code from
4.
To modify any other parameter options, scan the appropriate bar codes in this chapter.
5.
Interface Cable
Power Supply Cable
1-3).
Figure 7-1 are examples
RS-232 Host Types on page 7-6.