Connecting To The Host Computer; Batch Connection; Bluetooth Connection: Development Options; Pairing - Motorola CS4070 Manual

Connecting to the Host Computer

Batch Connection

The micro USB cable enables communication between the CS4070 and a PC, and charges the battery in the
CS4070.
NOTE To enter batch scanning mode, the scanner cannot be paired to a Bluetooth host.
To connect the CS4070 to a USB device:
Connect the USB A end of the USB cable to a USB port of the host or device.
1.
Connect the micro USB connector of the cable to the CS4070.
2.
Micro USB Cable Communication
Figure 1-5

Bluetooth Connection: Development Options

Serial Port Profile
This Bluetooth profile emulates a serial cable to provide a simply implemented wireless replacement for
existing RS-232 based serial communications applications, including familiar control signals. It is the preferred
communication profile implementation because accidental key strokes from the keyboard or touch screen on
the host are not entered into the bar code data stream.
Human Interface Device Emulation
This Bluetooth profile is a lightweight wrapper of the Human Interface Device protocol defined for USB. Data
transmitted from the Bluetooth scanner appears as keyboard entries to the Bluetooth host (Smartphone, PC,
etc).
NOTE Wedge data appears within whichever application has input focus.

Pairing

Pairing the CS4070 with a host device typically requires holding the Bluetooth button to place the scanner in
discoverable mode, then scanning a pairing PIN. For pairing examples, see
Examples.
Getting Started
Appendix C, Bluetooth Connection
1 - 5