Bluetooth Friendly Name; Discoverable Mode - Motorola Symbol DS3578 Product Reference Manual

Bluetooth Friendly Name

You can set a meaningful name for the scanner that appears in the application during device discovery. The default
name is the scanner name followed by its serial number, e.g.,
reverts the scanner to this name; use custom defaults to maintain the user-programmed name through a Set
Defaults operation.
To set a new Bluetooth Friendly Name, scan the following bar code, then scan up to 23 characters from
E, Alphanumeric Bar Codes. If the name contains less than 23 characters, scan
entering the name.
NOTE If your application allows you to set a device name, this takes precedence over the Bluetooth Friendly
Name.

Discoverable Mode

Select a discoverable mode based on the device initiating discovery:
•
Select General Discoverable Mode when initiating connection from a PC.
•
Select Limited Discoverable Mode when initiating connection from a mobile device (e.g., Motorola Q), and
the device does not appear in General Discoverable Mode. Note that it can take longer to discover the device
in this mode.
The device remains in Limited Discoverable Mode for 30 seconds, and green LEDs flash while in this mode.
It is then non-discoverable. To re-active Limited Discoverable Mode, press the trigger.
DS3578 123456789ABCDEF
Bluetooth Friendly Name
*
General Discoverable Mode
Limited Discoverable Mode
Radio Communications
. Scanning Set Defaults
Appendix
End of Message on page E-7
4 - 7
after