Chapter 1
Purpose of this Manual
This manual is for designers of systems based on the CoreModule
manual contains information that permits designers to create an embedded system based on specific design
requirements.
Information provided in this reference manual includes:
•
Product Overview
•
Hardware Specifications
•
BIOS Setup information
•
Technical Support Contact Information
Information not provided in this reference manual includes:
•
Detailed chip specifications (refer to the References section of this chapter)
•
Internal component operation
•
Internal registers or signal operations
•
Bus or signal timing for industry-standard busses and signals
•
Pin-signal definitions for industry-standard interfaces
References
The following list of references may help you successfully complete your custom design.
Expansion Bus Specifications
•
PC/104 Specification, Revision 2.5, November, 2003
•
PC/104-Plus Specification, Revision 2.0, November, 2003
Web site:
http://www.pc104.org
•
PCI Specification, Revision 3.0, August 12, 2002
Web site:
http://www.pcisig.com
•
LPC Bus Specification, Revision 1.1, August, 2002
Specification:
•
PCIe Specification, Revision 1.0a, April 15, 2003
Specification (for members):
2
•
I
C Bus Specification Version 2.1
Specification:
•
AMI BIOS Aptio TSE User's Guide
Data sheet:
http://www.ami.com/support/doc/AMI_TSE_User_Manual_PUB.pdf
•
Bosch CAN specification version 2.0B
Specification:
CoreModule 720
About This Manual
http://www.intel.com/design/chipsets/industry/25128901.pdf
http://www.pcisig.com/specifications/pciexpress/base/archive/
http://www.nxp.com/documents/other/39340011.pdf
http://www.can-cia.org/fileadmin/cia/specifications/CAN20B.pdf
Reference Manual
®
720 Single Board Computer (SBC). This
1
Need help?
Do you have a question about the CoreModule 720 and is the answer not in the manual?