Intercom - AT&T CL82114 User Manual

Multiple handset use

Intercom

Use the intercom feature for conversations between two handsets. You can
purchase expansion handsets (model AT&T CL80114) for this telephone base to
expand your telephone system (up to 12 handsets).
Using a handset to initiate intercom calls:
1. Press MENU/
SELECT
scroll to Intercom, then press
• If you have a two-handset system, the handset shows
Calling other handset.
• If you have more than two handsets, the handset shows
INTERCOM
device number (1-9 for handsets 1-9,
by 0-2 for handsets 10-12, or TONE followed by #
for all devices),
desired handset and press
screen shows Calling HANDSET X or
Calling all handsets.
The destination handset(s) rings and shows Other handset
is calling, HANDSET X is calling or HANDSET X is calling
all (HANDSET represents the handset name, X represents
the handset number).
2. To answer the intercom call, press PHONE/
dialing key (0-9, TONE , or # ) on the called device. Both devices now
show Intercom.
3. To end the intercom call, one party presses OFF/
handset back in the telephone base or charger. The other party hears four
beeps. Both devices display Intercom ended.
NOTES:
• Before the intercom call is answered, you can cancel it by pressing
• if the called party does not answer within 100 seconds or if the handset is in use, on a call or out
of range, the initiating device shows No answer. Try again.
• To temporarily silence the intercom ringer, press OFF/CANCEL or MUTE/
• You can only use one pair of handsets at a time to make intercom calls.
in idle mode to enter the main menu. Press q
MENU
TO:
Use the dialing keys to e e nter a specific
or press q
CID
MENU
/SELECT.
TONE followed
or p to scroll to the
DIR
/SELECT. Your handset
FLASH
The other party hears four
30
or p
CID
Calling
HANDSET X
HANDSET X
is calling
Intercom
11:35
, /SPEA�ER SPEA�ER or any
, or place the
CANCEL
/CANCEL CANCEL.
OFF
.
DELETE
to
DIR
12/02
AM