Table of Contents
Advertisement
Answering system
Answering system settings
Use the answering system menu of a system handset to set
up the announcement message, turn on or off the answering
system or message alert tone, activate call screening, or
change the number of rings, remote access code or message
recording time. If you turn off the answering system and
you change any setting in the answering system setup menu, the answering
system automatically turns on again.
1. When the device is in idle mode, press MENU/
main menu.
2. Press q
or p
CID
Announcement
Your outgoing announcement plays when calls are answered by the
answering system.
The telephone has a default outgoing announcement, "Hello. Please leave a
message after the tone." You can use this announcement, or record your
You can record an announcement up to 90 seconds. The system does not
record any announcement shorter than two seconds.
To play your current outgoing announcement:
1. When the handset is in idle mode, press MENU/
enter the main menu.
2. Press q
or p
CID
/SELECT.
MENU
3. Press
/SELECT again to select Announcement.
MENU
4. Press q
or p
CID
/SELECT.
MENU
to scroll to Answering sys, then press
DIR
to scroll to Answering sys, then press
DIR
to scroll to Play annc, then press
DIR
SELECT
SELECT
61
Play messages
>Answering sys
to enter the
/SELECT.
MENU
Announcement
>
Delete all old
to
Record annc
>Play annc
own.
- Quick Links:
- Delete Call Block Entry
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CL82114 and is the answer not in the manual?
Questions and answers
What to do when blocked calls cannot be added to. How to make more room for more blocking
To add a blocked call on the AT&T CL82114:
1. Press MENU/SELECT on the handset when it is not in use.
2. Use qCID or pDIR to scroll to Call block, then press MENU/SELECT.
3. Press MENU/SELECT to choose Block list.
4. Use qCID or pDIR to scroll to Add new entry, then press MENU/SELECT.
5. When the screen displays ENTER NUMBER, use the dialing keys to enter the number.
The system can store up to 20 blocked numbers. To make room for additional blocks, you must delete existing entries by accessing the Block list and removing unwanted numbers.
This answer is automatically generated