Table of Contents
Advertisement
Appendix
Alert tones and lights
Handset alert tones
One short beep
One long beep
Two short beeps
Confirmation tone
(three rising tones)
Four beeps
Four short beeps
Telephone base alert tones
One long beep
Four short beeps
Beeps every
ten seconds
Fast ringer tone
Tone of each key press, if key tone is turned on.
Indication to begin recording a message, memo or announcement.
You are pressing qCID or pDIR on a cordless handset when the
volume is already at its highest or lowest setting.
-OR-
Call waiting tone.
-OR-
Error tone.
The system has completed the command successfully.
The other party has ended your intercom call.
-OR-
The handset has gone out of range from the base during a call.
Low battery warning.
Indicates the start of message recording during call screening or
the end of a message playback session.
Registration failure tone.
Message alert.
You are setting the ringer volume by pressing the pVOLUME or
qVOLUME key on the telephone base.
85
- Quick Links:
- Delete Call Block Entry
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CL82114 and is the answer not in the manual?
Questions and answers
What to do when blocked calls cannot be added to. How to make more room for more blocking
To add a blocked call on the AT&T CL82114:
1. Press MENU/SELECT on the handset when it is not in use.
2. Use qCID or pDIR to scroll to Call block, then press MENU/SELECT.
3. Press MENU/SELECT to choose Block list.
4. Use qCID or pDIR to scroll to Add new entry, then press MENU/SELECT.
5. When the screen displays ENTER NUMBER, use the dialing keys to enter the number.
The system can store up to 20 blocked numbers. To make room for additional blocks, you must delete existing entries by accessing the Block list and removing unwanted numbers.
This answer is automatically generated