Push-To-Talk (Ptt); Turn Ptt On Or Off - AT&T CL82114 User Manual

Multiple handset use

Push-to-talk (PTT)

You can directly broadcast messages to the speakerphone of
any device. Press and hold PUSH TO TAL� on a handset to
begin two-way communication.
• Only one device can talk at a time. To do so,
press and hold PUSH TO TAL�.
You must release PUSH TO TAL�, so the other person can respond.
•
• Only one PTT session can be active at a time.
• While PTT is in use between two devices, other devices cannot use the
intercom feature but can access the answering system.
• When you attempt to place a PTT call to another device which is accessing
the answering system or on an intercom call or outside call, your device
screen shows Not available at this time.
NOTE: The PTT function is not available when QUIET mode is on or if you have only
one handset.

Turn PTT on or off

1. Press PUSH TO TAL� when the handset is not in use. The
PUSH TO TAL� menu displays.
2. Press q or p
CID
/SELECT.
MENU
3. Press q or p
CID
/SELECT.
MENU
NOTE: The handset screen displays No Incoming PTT when PTT is turned off.
to highlight PTT On/Off, then press
DIR
to choose On or Off, then press
DIR
33
PTT
PUSH TO TALK
>PTT On/Off