Table of Contents
Advertisement
Directory
Review the directory
Review directory entries
1. Press pDIR when in idle mode. The summary screen shows briefly and
then the first entry in the directory shows.
-OR-
Press MENU/
to Directory. Press
2. Press q
or p
CID
alphabetically by the first letter in the name.
NOTES:
•
If the telephone number in the directory exceeds 15 digits, < appears in front of the telephone
number. Press TONE
to move towards the beginning of the telephone number.
If there are no directory entries when you press pDIR in idle mode, Directory empty appears
•
briefly on the screen, followed by Add contact? If you would like to add a new contact, press
/SELECT and refer to page 39 for instructions on creating a new directory entry. Otherwise,
MENU
press
/CANCEL to cancel.
OFF
when in idle mode, then press q
SELECT
/SELECT twice.
MENU
to browse through the directory. Entries appear
DIR
to move towards the end of the telephone number or press # (pound key)
41
or p
to scroll
CID
DIR
- Quick Links:
- Delete Call Block Entry
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CL82114 and is the answer not in the manual?
Questions and answers
What to do when blocked calls cannot be added to. How to make more room for more blocking
To add a blocked call on the AT&T CL82114:
1. Press MENU/SELECT on the handset when it is not in use.
2. Use qCID or pDIR to scroll to Call block, then press MENU/SELECT.
3. Press MENU/SELECT to choose Block list.
4. Use qCID or pDIR to scroll to Add new entry, then press MENU/SELECT.
5. When the screen displays ENTER NUMBER, use the dialing keys to enter the number.
The system can store up to 20 blocked numbers. To make room for additional blocks, you must delete existing entries by accessing the Block list and removing unwanted numbers.
This answer is automatically generated