Table of Contents
Advertisement
Appendix
Screen display messages
Screen messages
Ringer muted
Saved
Setup Ans sys...
Speaker
TRANSFER TO: (for
systems with 3 or more
handsets)
To register HS,
see manual.
To screen call,
press [SELECT]
Unable to call.
Try again
XX Missed calls
XX New messages
The ringer is off temporarily while the device is ringing.
An entry has been successfully saved in the directory or call
block list.
The handset is playing voice guide.
The handset speakerphone is in use.
You have started transferring a call, and need to enter the
desired device number or choose all devices.
Screen display before handset registration.
Press MENU/SELECT to activate call screening.
You try to join a call when there are already four handsets on that call.
You try to make an outside call when another device is
transferring a call with the intercom feature.
There are new calls in the caller ID log.
There are new messages in the answering system.
89
- Quick Links:
- Delete Call Block Entry
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CL82114 and is the answer not in the manual?
Questions and answers
What to do when blocked calls cannot be added to. How to make more room for more blocking
To add a blocked call on the AT&T CL82114:
1. Press MENU/SELECT on the handset when it is not in use.
2. Use qCID or pDIR to scroll to Call block, then press MENU/SELECT.
3. Press MENU/SELECT to choose Block list.
4. Use qCID or pDIR to scroll to Add new entry, then press MENU/SELECT.
5. When the screen displays ENTER NUMBER, use the dialing keys to enter the number.
The system can store up to 20 blocked numbers. To make room for additional blocks, you must delete existing entries by accessing the Block list and removing unwanted numbers.
This answer is automatically generated