Table of Contents
Advertisement
Answering system
Answering system settings
To record a new outgoing announcement:
1. When the handset is in idle mode, press MENU/
main menu.
2. Press q
or p
CID
3. Press
/SELECT again to select Announcement.
MENU
4. Press
/SELECT to select Record annc. The system
MENU
announces, "Record after the tone. Press 5 when you are
done."
5. Speak towards the handset to record your announcement.
Press 5 to end recording. Your recorded announcement plays.
To listen to the recorded announcement again, scroll to Play annc and press
/SELECT.
MENU
To reset your outgoing announcement:
1. When the handset is in idle mode, press MENU/
2. Press
q
or p
CID
3. Press
/SELECT again to select Announcement.
MENU
q
or p
4. Press
CID
The screen shows Reset to default annc? Press
confirm. The screen shows Annc. reset to default before returning to the
previous menu.
-OR-
q
or p
Press
CID
While the announcement is playing, press
announcement. The screen shows Annc. Deleted before returning to the
previous menu.
When your announcement is deleted, the system answers calls with the
default announcement described on page 61. You cannot delete the
default announcement.
to scroll to Answering sys, then press
DIR
to scroll to Answering sys, then press
DIR
to scroll to Reset annc,
DIR
to scroll to Play annc,
DIR
SELECT
SELECT
then press
MENU
then press
/DELETE to delete the
MUTE
62
to enter the
/SELECT.
MENU
>Record annc
Play annc
to enter the main menu.
/SELECT.
MENU
/SELECT.
MENU
/SELECT again to
/SELECT.
MENU
- Quick Links:
- Delete Call Block Entry
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CL82114 and is the answer not in the manual?
Questions and answers
What to do when blocked calls cannot be added to. How to make more room for more blocking
To add a blocked call on the AT&T CL82114:
1. Press MENU/SELECT on the handset when it is not in use.
2. Use qCID or pDIR to scroll to Call block, then press MENU/SELECT.
3. Press MENU/SELECT to choose Block list.
4. Use qCID or pDIR to scroll to Add new entry, then press MENU/SELECT.
5. When the screen displays ENTER NUMBER, use the dialing keys to enter the number.
The system can store up to 20 blocked numbers. To make room for additional blocks, you must delete existing entries by accessing the Block list and removing unwanted numbers.
This answer is automatically generated