Table of Contents
Advertisement
Directory
Speed dial
The telephone system has nine speed dial locations (2-9,
0) and a voicemail access location
store the telephone numbers you wish to dial more quickly.
You can store up to 30 digits in each location. Speed
dial assignments can only be selected from the existing
directory entries. The voicemail access number must be
manually entered. In the directory, speed dial locations are
indicated by their number on the bottom of the screen.
Assign a speed dial number
1. When the telephone is idle, press MENU
2. Press q
or p
CID
3. Press q
or p
CID
4. Press q
or p
CID
location (0 or 2-9), then press
briefly shows Copy from Directory... and then displays the
directory list.
5. Press q
or p
CID
wish to assign to the selected speed dial location.
/SELECT to save the setting and return to
6. Press
MENU
the previous menu. There is a confirmation tone and the
screen returns to the speed dial list.
-OR-
1. When the telephone is idle, press and hold any dialing keys
(0 or 2-9).
2. Press q
or p
CID
then press
MENU
and then displays the directory list.
3. Press q
or p
CID
the selected speed dial location.
4. Press
/SELECT to save the setting and return to the previous menu.
MENU
There is a confirmation tone and the screen returns to the speed dial list.
to scroll to Directory. Press
DIR
to scroll to Speed dial. Press
DIR
to choose your desired speed dial
DIR
MENU
to scroll to the phone number you
DIR
to choose your desired speed dial location (0 or 2-9),
DIR
/SELECT. The screen briefly shows Copy from Directory...
to scroll to the phone number you wish to assign to
DIR
1 where you can
.
/SELECT
SELECT.
MENU/
MENU/
/SELECT. The screen
45
Robert Brown
888-883-2445
2
Speed dial location
Answering sys
SELECT.
>Directory
Add contact
>Speed dial
>2:Robert Brown
3:<Unassigned>
- Quick Links:
- Delete Call Block Entry
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CL82114 and is the answer not in the manual?
Questions and answers
What to do when blocked calls cannot be added to. How to make more room for more blocking
To add a blocked call on the AT&T CL82114:
1. Press MENU/SELECT on the handset when it is not in use.
2. Use qCID or pDIR to scroll to Call block, then press MENU/SELECT.
3. Press MENU/SELECT to choose Block list.
4. Use qCID or pDIR to scroll to Add new entry, then press MENU/SELECT.
5. When the screen displays ENTER NUMBER, use the dialing keys to enter the number.
The system can store up to 20 blocked numbers. To make room for additional blocks, you must delete existing entries by accessing the Block list and removing unwanted numbers.
This answer is automatically generated