Table of Contents
Advertisement
Answering system
Base message counter displays
The base message counter shows the total number of answering system
messages. See the following table for other message counter displays.
Message counter displays
0
0
(flashing)
1-99
1-99
(flashing)
1-99 & F
(alternating)
- -
0-6
1-8
No messages.
You need to set the clock (page 13).
Total number of old messages and memos, or message
number currently playing during old message playback.
Total number of messages and memos. The number
flashes when there are new or missed messages.
After a power failure, the number in the message counter
flashes to indicate that you need to set the clock.
Memory is full. You must delete some messages before
recording new messages.
The system is answering a call, recording a message or
memo, or is being reached remotely.
The telephone line is in use.
Shows for two seconds while adjusting the telephone
base ringer volume.
Shows for two seconds while adjusting the telephone
base speaker volume.
78
- Quick Links:
- Delete Call Block Entry
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CL82114 and is the answer not in the manual?
Questions and answers
What to do when blocked calls cannot be added to. How to make more room for more blocking
To add a blocked call on the AT&T CL82114:
1. Press MENU/SELECT on the handset when it is not in use.
2. Use qCID or pDIR to scroll to Call block, then press MENU/SELECT.
3. Press MENU/SELECT to choose Block list.
4. Use qCID or pDIR to scroll to Add new entry, then press MENU/SELECT.
5. When the screen displays ENTER NUMBER, use the dialing keys to enter the number.
The system can store up to 20 blocked numbers. To make room for additional blocks, you must delete existing entries by accessing the Block list and removing unwanted numbers.
This answer is automatically generated