Table of Contents
Advertisement
Answering system
Message playback
If you have new messages, you hear only the new messages in chronological
order. If there are no new messages, the system plays back all old messages
(in chronological order). If there are both new and old messages, you have
the option of playing the new or old messages. The message counter flashes
indicating the number of new messages saved.
When playback begins, the total number of messages is announced. Before
each message, you hear the day and time of the recording. If the date and
time are not set, you hear, "Time and date not set," before playback. After
the last message, you hear, "End of messages." If the recording time is less
than three minutes, you hear, "Less than three minutes to record" before
playback (see Message capacity on page 71).
To listen to messages at the telephone base:
Press
/PLAY/
system announces the number of messages, then begins playback. Press
/PLAY/
STOP
To listen to messages on a cordless handset:
1. When the handset is in idle mode, press MENU/
enter the main menu.
2. Press
/SELECT again to select Play messages.
MENU
•
If there are new and old messages, press q
to select Play new msgs or Play old msgs, then press
SELECT.
MENU/
•
If there are only new or only old messages, they will
play automatically.
The system announces the number of messages, then
begins playback. The message sequence is shown on
the handset. If there are no recorded messages, the
handset shows No messages and you hear,
"You have no message."
on the telephone base to listen to the messages. The
STOP
again to end the message playback.
SELECT
or p
CID
74
to
>Play new msgs
Play old msgs
DIR
You have:
3 New messages
Charlie Johnson
4-Repeat 6-Skip
NEW
10:01
AM
ANS ON
ANS ON
ANS ON
MSG#
1/3
- Quick Links:
- Delete Call Block Entry
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CL82114 and is the answer not in the manual?
Questions and answers
What to do when blocked calls cannot be added to. How to make more room for more blocking
To add a blocked call on the AT&T CL82114:
1. Press MENU/SELECT on the handset when it is not in use.
2. Use qCID or pDIR to scroll to Call block, then press MENU/SELECT.
3. Press MENU/SELECT to choose Block list.
4. Use qCID or pDIR to scroll to Add new entry, then press MENU/SELECT.
5. When the screen displays ENTER NUMBER, use the dialing keys to enter the number.
The system can store up to 20 blocked numbers. To make room for additional blocks, you must delete existing entries by accessing the Block list and removing unwanted numbers.
This answer is automatically generated