Number Of Rings - AT&T CL82114 User Manual

Answering system
Answering system settings

Number of rings

You can set the answering system to answer an incoming call after two, three,
four, five or six rings. You can also select toll saver. If toll saver is selected, the
answering system answers a call after two rings when you have new messages,
and after four rings when there are no new messages. This feature allows you
to check for new messages and avoid paying long distance charges when
calling from out of your local area. By default, the answering system answers
an incoming call after four rings.
To set the number of rings:
1. When the handset is in idle mode, press MENU/
enter the main menu.
2. Press q or p
CID
/SELECT.
MENU
3. Press q or p
CID
/SELECT.
MENU
4. Press q or p
CID
/SELECT.
MENU
5. Press q or p
CID
Toll saver.
6. Press /SELECT to save the setting. You hear a confirmation tone.
MENU
NOTES:
• If you subscribe to voicemail service through your telephone service provider, see
Answering system and voicemail indicators on page 70.
• If you set the number of rings for the answering system as two or three rings, the caller ID
announce feature may not have enough time to announce the caller's full information.
to scroll to Answering sys, then press
DIR
to scroll to Ans sys setup, then press
DIR
to scroll to # of rings, then press
DIR
to choose among 2, 3, 4, 5, 6 or
DIR
SELECT
66
to
Call screening
># of rings
# OF RINGS
>4