Blind Transfer - AT&T CL82114 User Manual

Telephone operation
Options while on calls

Blind transfer

While on an outside call, you can transfer the call to a specific device or any
device without notifying them.
To transfer an outside call directly without notifying the desired device:
1. During the call, press MENU/
2. Press /SELECT again to choose Transfer.
MENU
• If you have a two-handset system and no other
registered devices, the outside call is put on hold and
your handset shows Transferring call... The other
handset rings and shows Transfer from other handset.
• If you have other registered device(s) or more than
two handsets, your screen shows TRANSFER TO: Use
the dialing keys to e e nter a specific device number (1-9
for handsets 1-9,
10-12, or TONE followed by # for all devices),
q
press
CID
press
MENU
and your handset screen shows Transferring call... or
Transferring call to all...
shows Transfer from HANDSET X
name, X represents the handset number).
3. To answer the call on the destination handset, press
/SPEA�ER SPEA�ER,
shows Call transferred and goes to idle mode.
NOTES:
• To cancel the transfer and return to the external call before the blind transfer call is answered,
/CANCEL,
press
OFF
• If the other device does not answer the transfer within 30 seconds, the transfer ends and the
initiating device rings while showing No response to transfer. If it does not pick up within 30
seconds, the device returns to idle mode and the outside call ends.
TONE followed by 0-2 for handsets
or p
to scroll to the desired device and
DIR
/SELECT.
The outside call is put on hold
The other device rings and
or any dialing key (0-9, TONE
PHONE/
FLASH
.
SELECT
(HANDSET represents the handset
/SPEA�ER SPEA�ER on your handset.
or
28
Phone
>Transfer
or
>Handset
, press PHONE/
or #). The initiating handset
0:00:12
6:30
8/06
AM
Intercom
TRANSFER TO:
2
,
FLASH