Table of Contents
Advertisement
Telephone settings
Handset settings
NOTE: If in the future, your telephone service provider requires you to dial ten digits to
make a local call (area code plus telephone number), you need to delete your home
area code and dial out locally from the call ID log. With the home area code displayed,
press and hold
The home area code is now restored to its default setting of _ _ _ (empty).
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
To set the dial mode:
1. Press MENU/
2. Use
q
or
CID
/SELECT.
MENU
3. Use
q
or
CID
/SELECT.
MENU
4. Use
or
q
CID
/SELECT. There is a confirmation tone and the
press
MENU
screen returns to the previous menu.
Web address
Use this feature to view the AT&T website address.
1. Press MENU/
2. Use
q
or
CID
/SELECT.
MENU
/DELETE until the digits are deleted, and then press
MUTE
in idle mode to enter the main menu.
SELECT
to scroll to Settings, then press
p
DIR
p
to scroll to Dial mode, then press
DIR
to highlight Touch-tone or Pulse, then
p
DIR
in idle mode to enter the main menu.
SELECT
to scroll to Web address, then press
p
DIR
20
/SELECT.
MENU
Home area code
>Dial mode
DIAL MODE
>Touch-tone
Settings
Web address
>
www.telephones.
att.com
- Quick Links:
- Delete Call Block Entry
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CL82114 and is the answer not in the manual?
Questions and answers
What to do when blocked calls cannot be added to. How to make more room for more blocking
To add a blocked call on the AT&T CL82114:
1. Press MENU/SELECT on the handset when it is not in use.
2. Use qCID or pDIR to scroll to Call block, then press MENU/SELECT.
3. Press MENU/SELECT to choose Block list.
4. Use qCID or pDIR to scroll to Add new entry, then press MENU/SELECT.
5. When the screen displays ENTER NUMBER, use the dialing keys to enter the number.
The system can store up to 20 blocked numbers. To make room for additional blocks, you must delete existing entries by accessing the Block list and removing unwanted numbers.
This answer is automatically generated