Table of Contents
Advertisement
Directory
Speed dial
Delete a speed dial number
1. When the telephone is idle, press MENU
2. Press q
or p
CID
/SELECT.
MENU
3. Press q
or p
CID
/SELECT.
MENU
4. Press q
or p
CID
to delete the speed dial number from, then:
•
Press
MUTE
number. There is a confirmation tone and the screen
shows Speed dial empty before returning to the speed
dial list.
-OR-
i. Press
MENU
ii. Press
MENU
iii. Scroll to Clear SD and then press
speed dial number. There is a confirmation tone and the screen shows
Speed dial empty before returning to the speed dial list.
Make a call using speed dial
When in idle mode, press and hold the dialing key (0 or 2-9) corresponding
to the assigned location you wish to call.
-OR-
1. Press MENU
/SELECT
2. Press q
or p
CID
3. Press q
or p
CID
4. Press q
or p
CID
press PHONE/
Check your voicemail using speed dial
When in idle mode, press and hold
have set. See page 16 to set your voicemail speed dial number.
to scroll to Directory. Press
DIR
to scroll to Speed dial. Press
DIR
to scroll to the location you wish
DIR
/DELETE to delete the displayed speed dial
/SELECT to show the directory entry.
/SELECT again.
when in idle mode.
to scroll to Directory, then press
DIR
to scroll to Speed dial, then press
DIR
to scroll to the desired location (0 or 2-9) and then
DIR
or
/SPEA�ER
SPEA�ER
FLASH
.
/SELECT
/SELECT to delete the displayed
MENU
.
1 to dial the voicemail number you
47
Linda Miller
888-722-7702
2
Speed dial
empty
>2:<Unassigned>
3:<Unassigned>
/SELECT.
MENU
/SELECT.
MENU
- Quick Links:
- Delete Call Block Entry
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CL82114 and is the answer not in the manual?
Questions and answers
What to do when blocked calls cannot be added to. How to make more room for more blocking
To add a blocked call on the AT&T CL82114:
1. Press MENU/SELECT on the handset when it is not in use.
2. Use qCID or pDIR to scroll to Call block, then press MENU/SELECT.
3. Press MENU/SELECT to choose Block list.
4. Use qCID or pDIR to scroll to Add new entry, then press MENU/SELECT.
5. When the screen displays ENTER NUMBER, use the dialing keys to enter the number.
The system can store up to 20 blocked numbers. To make room for additional blocks, you must delete existing entries by accessing the Block list and removing unwanted numbers.
This answer is automatically generated