Table of Contents
Advertisement
Answering system
Answering system settings
Answer on/off
By default, the answering system is on and ready to record messages. You
can turn the answering system off, but if you do so, the answering system
does not answer calls and record incoming messages.
To turn the answering system on or off:
Using a cordless handset:
1. When the handset is in idle mode, press MENU/
enter the main menu.
2. Press q
or p
CID
press
/SELECT.
MENU
3. Press q
or p
CID
/SELECT.
press
MENU
4. Press q
or p
CID
press
/SELECT to save the setting. You hear a
MENU
confirmation tone.
When the answering system is on, the handset shows
ANS ON.
Using the telephone base:
•
Press
/ANS ON/OFF
answering system on or off. If the
answering system is turned on, it
announces, "Calls will be answered." If
the answering system is turned off, it
announces, "Calls will not be answered."
NOTE: If the answering system is off and there
is an incoming call, the system answers after
ten rings and announces, "Please enter your
remote access code." For more information
about remote access, see page 79.
to scroll to Answering sys, then
DIR
to scroll to Answer ON/OFF, then
DIR
to highlight On or Off, then
DIR
to turn the
SELECT
63
Play messages
to
>Answering sys
Record memo
>Answer ON/OFF
ANSWER ON/OFF
>On
- Quick Links:
- Delete Call Block Entry
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CL82114 and is the answer not in the manual?
Questions and answers
What to do when blocked calls cannot be added to. How to make more room for more blocking
To add a blocked call on the AT&T CL82114:
1. Press MENU/SELECT on the handset when it is not in use.
2. Use qCID or pDIR to scroll to Call block, then press MENU/SELECT.
3. Press MENU/SELECT to choose Block list.
4. Use qCID or pDIR to scroll to Add new entry, then press MENU/SELECT.
5. When the screen displays ENTER NUMBER, use the dialing keys to enter the number.
The system can store up to 20 blocked numbers. To make room for additional blocks, you must delete existing entries by accessing the Block list and removing unwanted numbers.
This answer is automatically generated