Table of Contents
Advertisement
Answering system
Answering system settings
Call screening
Use this feature to choose whether incoming messages can be heard over
the speaker when they are being recorded. If you turn call screening on, you
hear the incoming message. While monitoring an incoming message, you can
answer the call by pressing PHONE/
To change the setting:
1. When the handset is in idle mode, press MENU/
enter the main menu.
2. Press q
or p
CID
press
/SELECT.
MENU
3. Press q
or p
CID
press
/SELECT.
MENU
4. Press
/SELECT to select Call screening.
MENU
5. Press q
or p
CID
/SELECT to save the setting. You hear a
6. Press
MENU
confirmation tone.
NOTE: For more information on call screening, see page 72.
to scroll to Answering sys, then
DIR
to scroll to Ans sys setup, then
DIR
to choose On or Off.
DIR
on the handset.
FLASH
SELECT
65
to
Voice guide
>Ans sys setup
Call screening
>
# of rings
CALL SCREENING
>On
- Quick Links:
- Delete Call Block Entry
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CL82114 and is the answer not in the manual?
Questions and answers
What to do when blocked calls cannot be added to. How to make more room for more blocking
To add a blocked call on the AT&T CL82114:
1. Press MENU/SELECT on the handset when it is not in use.
2. Use qCID or pDIR to scroll to Call block, then press MENU/SELECT.
3. Press MENU/SELECT to choose Block list.
4. Use qCID or pDIR to scroll to Add new entry, then press MENU/SELECT.
5. When the screen displays ENTER NUMBER, use the dialing keys to enter the number.
The system can store up to 20 blocked numbers. To make room for additional blocks, you must delete existing entries by accessing the Block list and removing unwanted numbers.
This answer is automatically generated