Table of Contents
Advertisement
Appendix
Screen display messages
Screen messages
Blocked call
Block list
is empty
Call
transferred
Caller ID log
empty
Calling
HANDSET X (for systems
with 3 or more handsets)
Calling other
handset (for systems
with 2 handsets)
CID Annc ON/OFF
on all HS and BS
Contact deleted
Directory empty
Directory full
Ended
HANDSET X
is calling (for
systems with 3 or more
handsets)
Incoming call
Intercom
Intercom ended
INTERCOM TO: (for
systems with 3 or more
handsets)
Line in use
Low battery
An incoming call is blocked.
There are no block list entries.
You have transferred an outside call to another device.
There are no entries in the caller ID log.
The handset is calling another handset (for intercom calls).
The handset is transferring an outside call to another handset.
The handset is calling the other handset (for intercom calls).
The handset is transferring an outside call to the other handset.
The caller ID announce features has been turned on or off on
all handsets.
A directory entry is deleted.
There are no directory entries.
The directory is full. You cannot save any new entries unless
you delete some current entries.
You have just ended a call.
Another system handset is calling.
There is a call coming in.
The device is on an intercom call.
The intercom call has just ended.
You have started the intercom process, and need to enter the
number of the device you wish to call.
An extension phone, or one of the devices is in use.
The battery is low. You should charge the battery.
87
- Quick Links:
- Delete Call Block Entry
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CL82114 and is the answer not in the manual?
Questions and answers
What to do when blocked calls cannot be added to. How to make more room for more blocking
To add a blocked call on the AT&T CL82114:
1. Press MENU/SELECT on the handset when it is not in use.
2. Use qCID or pDIR to scroll to Call block, then press MENU/SELECT.
3. Press MENU/SELECT to choose Block list.
4. Use qCID or pDIR to scroll to Add new entry, then press MENU/SELECT.
5. When the screen displays ENTER NUMBER, use the dialing keys to enter the number.
The system can store up to 20 blocked numbers. To make room for additional blocks, you must delete existing entries by accessing the Block list and removing unwanted numbers.
This answer is automatically generated