Table of Contents
Advertisement
Telephone settings
Handset settings
Set date/time
The answering system announces the day and time of each message prior
to playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are
set automatically with each incoming call. The year must be set so that the
day of the week can be calculated from the caller ID information. You can
turn off the date and time settings of the caller ID service and set the date
and time manually (see Use caller ID to automatically set date and time
on page 19).
After a power failure or handset registration, the system prompts you to set
the date and time.
To set the date and time manually:
1.
When the handset is in idle mode, press MENU/
enter the main menu.
2.
Press
or
q
CID
/SELECT.
press
MENU
3.
Press
q
or
CID
/SELECT, or enter the number using the dialing keys.
MENU
4.
Press
q
or
CID
/SELECT, or enter the number using the dialing keys.
MENU
5.
Press
or
q
CID
using the dialing keys, then press
to set the time.
6.
Press
or
q
CID
/SELECT, or enter the number using the dialing keys.
MENU
7.
Press
or
q
CID
/SELECT, or enter the number using the dialing keys.
MENU
8.
Press
q
or
CID
7 for PM. Press
the screen returns to the previous menu.
NOTE: If the clock is not set when a message is recorded, the system announces, "Time and
day not set," before it plays the message.
to scroll to Set date/time and then
p
DIR
p
to select the month, then press
DIR
p
to select the day, then press
DIR
to select the year, or enter the number
p
DIR
to select the hour, then press
p
DIR
to select the minute, then press
p
DIR
to highlight AM or PM, or press 2 for AM or
p
DIR
/SELECT to confirm. There is a confirmation tone and
MENU
SELECT
/SELECT to move on
MENU
13
to
Ringers
>Set date/time
SET DATE
MM/DD/YY
SET TIME
HH:MM --
- Quick Links:
- Delete Call Block Entry
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CL82114 and is the answer not in the manual?
Questions and answers
What to do when blocked calls cannot be added to. How to make more room for more blocking
To add a blocked call on the AT&T CL82114:
1. Press MENU/SELECT on the handset when it is not in use.
2. Use qCID or pDIR to scroll to Call block, then press MENU/SELECT.
3. Press MENU/SELECT to choose Block list.
4. Use qCID or pDIR to scroll to Add new entry, then press MENU/SELECT.
5. When the screen displays ENTER NUMBER, use the dialing keys to enter the number.
The system can store up to 20 blocked numbers. To make room for additional blocks, you must delete existing entries by accessing the Block list and removing unwanted numbers.
This answer is automatically generated