Table of Contents
Advertisement
Telephone settings
Handset settings
Caller ID announce
The caller ID announce feature lets you know who's calling without having to
look at the display. When you have an incoming call, the handset and/or base
speaks "Call from..." and the name of the caller based on the directory or caller
ID information. If the caller's name is private or unknown, the phone number
up to the last 11 digits will be announced. If the caller's phone number is also
private or unknown, no information will be announced. The default setting is On.
To turn on or off the caller ID announce feature:
1. Press MENU/
2. Use
q
or
p
CID
3. Use
q
or
CID
press
/SELECT.
MENU
4. Use
or
q
CID
/SELECT.
press
MENU
Set all On/Off - Change the setting for the base and
•
all handsets.
•
Local handset - Change the setting for that handset only.
•
Base - Change the setting for the telephone base only.
5. Use
or
q
CID
/SELECT. There is a confirmation tone and the screen
MENU
returns to the previous menu. If you change the setting to
Set all On/Off, the screen shows CID Annc ON/OFF on all HS & BS.
NOTES:
•
To use the caller ID announce feature, you must subscribe to caller ID service from your
telephone service provider.
•
When there are up to five handsets registered, the telephone system supports caller ID announce
for all handsets. If six or more handsets are registered, the system supports caller ID announce for
the first four registered handsets only.
•
This feature does not announce information for call waiting calls.
•
It takes at least two rings for the phone to receive caller ID information and announce it. If the
phone is answered before the end of the second ring, the phone won't have time to announce
the caller's information.
•
Pronunciation of names may vary with this feature. Not all names may be pronounced correctly.
•
Caller ID announce is available in English only.
in idle mode to enter the main menu.
SELECT
to scroll to Settings, then press
DIR
p
to scroll to Caller ID annc, then
DIR
to highlight the desired option, then
p
DIR
to highlight On or Off, then press
p
DIR
/SELECT.
MENU
15
LCD language
>Caller ID annc
CALLER ID ANNC
>Local handset
HS CID ANNOUNCE
>On
- Quick Links:
- Delete Call Block Entry
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CL82114 and is the answer not in the manual?
Questions and answers
What to do when blocked calls cannot be added to. How to make more room for more blocking
To add a blocked call on the AT&T CL82114:
1. Press MENU/SELECT on the handset when it is not in use.
2. Use qCID or pDIR to scroll to Call block, then press MENU/SELECT.
3. Press MENU/SELECT to choose Block list.
4. Use qCID or pDIR to scroll to Add new entry, then press MENU/SELECT.
5. When the screen displays ENTER NUMBER, use the dialing keys to enter the number.
The system can store up to 20 blocked numbers. To make room for additional blocks, you must delete existing entries by accessing the Block list and removing unwanted numbers.
This answer is automatically generated