Table of Contents
Advertisement
Answering system
About the answering system
Voice prompts
The system provides voice prompts to guide you through the setup procedures
on your handsets, message playback, remote access and recording outgoing
announcements. The system also provide basic answering system setup via
voice guide to record your own announcement, set the number of rings, and
set the message alert tone.
Call screening
To screen a call at the telephone base:
If the answering system and call screening are on (see Call screening on
page 58), the announcement and the incoming message broadcast at the
telephone base when a call is answered by the answering system.
Options while a message is being recorded:
Press pVOLUME or qVOLUME on the telephone base to adjust the call
•
screening volume.
•
Press
/PLAY/STOP to temporarily silence the call screening.
•
Press
/PLAY/STOP to temporarily turn on the call screening if call
screening is set to off.
To screen a call at the handset:
While a message is being recorded, the handset shows
To screen call, press [SELECT]. Press
Options while a message is being recorded:
•
Press q
/VOLUME or p
CID
screening volume.
•
Press
/CANCEL to temporarily silence the call screening.
OFF
•
Press
/SELECT to temporarily turn on the call screening if call
MENU
screening is set to off.
/SPEA�ER
SPEA�ER to broadcast the announcement and the incoming
•
Press
message through the speakerphone. Press again to turn off the speakerphone.
/SELECT to screen the call.
MENU
/VOLUME on the handset to adjust the call
DIR
72
- Quick Links:
- Delete Call Block Entry
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CL82114 and is the answer not in the manual?
Questions and answers
What to do when blocked calls cannot be added to. How to make more room for more blocking
To add a blocked call on the AT&T CL82114:
1. Press MENU/SELECT on the handset when it is not in use.
2. Use qCID or pDIR to scroll to Call block, then press MENU/SELECT.
3. Press MENU/SELECT to choose Block list.
4. Use qCID or pDIR to scroll to Add new entry, then press MENU/SELECT.
5. When the screen displays ENTER NUMBER, use the dialing keys to enter the number.
The system can store up to 20 blocked numbers. To make room for additional blocks, you must delete existing entries by accessing the Block list and removing unwanted numbers.
This answer is automatically generated