Create Directory Entries; Create A New Directory Entry - AT&T CL82114 User Manual

Directory

Create directory entries

Create a new directory entry

1. Press MENU/
2. Press q or p
CID
/SELECT.
MENU
3. Press q or p
CID
4. Press /SELECT.
MENU
5. Use the dialing keys to enter a telephone number (up to
30 digits) when prompted.
Press q
•
CID
or right.
• Press
MUTE
• Press and hold
• Press and hold
dialing pause (a p appears).
-OR-
Copy a number from the redial list by pressing
REDIAL/
PAUSE
REDIAL/
PAUSE
/SELECT to copy the number.
MENU
/SELECT to move on to the name.
6. Press
MENU
• The screen shows Number already saved if the number
is already in the directory. You cannot save the same
number twice.
7. Use the dialing keys to enter a name (up to 15 characters)
when prompted. Each time you press a key, the character
on that key appears. Additional key presses produce other
characters on that key. See the chart on next page.
• Press q
CID
Press 0 to add a space.
•
• Press
MUTE
• Press and hold
Press TONE
•
in idle mode to enter the main menu.
SELECT
to scroll to Directory, then press
DIR
to highlight Add contact.
DIR
or p
to move the cursor to the left
DIR
/DELETE to erase a digit.
/DELETE to erase all digits.
MUTE
/PAUSE to enter a three-second
REDIAL
, then q , p
CID
repeatedly to locate the number. Press
or p to move the cursor to the left or right.
DIR
/DELETE to erase a character.
/DELETE to erase all characters.
MUTE
to change the next letter to upper or lower case.
, or pressing or pressing
DIR
39
Answering sys
>Directory
Review
>Add contact
ENTER NUMBER
888-883-2445 _
ENTER NAME
Robert Brown_
Saved