Table of Contents
Advertisement
Call block
About call block
If you have subcribed to caller ID service, you can use the call block
feature to reject certain calls automatically. The call block list stores up
to 20 entries. The telephone system can reject calls automatically
according to:
•
Numbers saved into the call block list
•
Incoming calls without numbers
This feature is only available on the cordless handset.
When a call is blocked, the caller will hear a simulated
busy tone for one ring cycle. The call recipient may pick up the call during
the first ring when there is no caller ID information. Otherwise, the call is
disconnected.
NOTE: The blocked calls are displayed as Blocked call in the caller ID log.
55
Blocked call
888-772-7702
- Quick Links:
- Delete Call Block Entry
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CL82114 and is the answer not in the manual?
Questions and answers
What to do when blocked calls cannot be added to. How to make more room for more blocking
To add a blocked call on the AT&T CL82114:
1. Press MENU/SELECT on the handset when it is not in use.
2. Use qCID or pDIR to scroll to Call block, then press MENU/SELECT.
3. Press MENU/SELECT to choose Block list.
4. Use qCID or pDIR to scroll to Add new entry, then press MENU/SELECT.
5. When the screen displays ENTER NUMBER, use the dialing keys to enter the number.
The system can store up to 20 blocked numbers. To make room for additional blocks, you must delete existing entries by accessing the Block list and removing unwanted numbers.
This answer is automatically generated