Table of Contents
Advertisement
Telephone settings
Handset settings
Set date/time
The answering system announces the day and time of each
message prior to playing it. Before using the answering system,
set the date and time as follows. If you subscribe to caller ID
service, the day, month and time are set automatically with each
incoming call. The year must be set so that the day of the week
can be calculated from the caller ID information. You can turn off
the date and time settings of the caller ID service and set the date
and time manually (see Use caller ID to automatically set date
and time on page 30).
After a power failure or handset registration, the system prompts
you to set the date and time.
To set the date and time manually:
1. When the handset is in idle mode, press
MENU/
SELECT
2. Press q
CID
and then press
3. Press q
CID
press
MENU
the dialing keys.
4. Press q
CID
/SELECT, or enter the number using the
MENU
dialing keys.
5. Press q
CID
number using the dialing keys, then press
/SELECT to move on to set the time.
MENU
6. Press q
CID
/SELECT, or enter the number using the dialing keys.
MENU
7. Press q
CID
/SELECT, or enter the number using the dialing keys.
MENU
to enter the main menu.
or p
to scroll to Set date/time
DIR
/SELECT.
MENU
or p
to select the month, then
DIR
/SELECT, or enter the number using
or p
to select the day, then press
DIR
or p
to select the year, or enter the
DIR
or p
to select the hour, then press
DIR
or p
to select the minute, then press
DIR
23
Ringers
>Set date/time
SET DATE
MM/DD/YY
SET TIME
HH:MM --
Advertisement
Table of Contents
