Lcd Language; Set Date And Time - AT&T DLP73450 Complete User's Manual

Telephone settings
Handset settings

LCD language

You can select English, French, or Spanish to be used for all screen displays.
To select the LCD language:
1. Press MENU/
2. Press or
CID
/SELECT.
MENU
/SELECT to select LCD language.
3. Press
MENU
4. Press or
CID
Español, then press
Note: If you accidentally change the LCD language to French or Spanish, you can reset
it back to English without going through the French or Spanish menus. Press
MENU/SELECT in idle mode, then enter

Set date and time

The answering system announces the day and time of each message prior
to playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. However, the year must be correct so
that the day of the week can be calculated from the caller ID information.
After handset registration or a power failure, the handset will prompt you to set
the date and time.
To set the date and time manually:
1. Press MENU/
2. Press or
CID
press /SELECT.
MENU
3. Enter the month using the dialing keys.
4. Enter the day using the dialing keys.
5. Enter the year using the dialing keys, then press
/SELECT to move on to set the time.
MENU
6. Enter the hour using the dialing keys.
7. Enter the minute using the dialing keys.
8. Press or
CID
/SELECT to confirm.
MENU
Note: If the date and time are not set when a message is recorded, the system
announces, "Time and day not set," before each message plays.
in idle mode.
SELECT
to highlight Settings, then press
DIR
to highlight English, Français or
DIR
/SELECT to confirm.
MENU
in idle mode.
SELECT
to highlight Set date/time, then
DIR
to highlight AM or PM, then press
DIR
*
364#. There is a confirmation tone.
35
LCD language
ECO
English
ECO
Set date/time
ECO
Date: MM/DD/YY
ECO
Time: HH:MM - -
ECO