Set Date/Time - AT&T BL103-1K Complete User's Manual

Telephone settings
Telephone base settings

Set date/time

The answering system announces the day and time of each message prior
to playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. The year must be set so that the day
of the week can be calculated from the caller ID information. You can turn off
the date and time settings of the caller ID service and set the date and time
manually (see Use caller ID to automatically set date and time on page 51).
After a power failure, the system prompts you to set the date and time.
To set the date and time manually:
1. When the telephone base is in idle mode, press MENU/
main menu.
2. Press or
q
CID
then press
MENU
3. Press or
q
CID
/SELECT, or enter the number using the
MENU
dialing keys.
4. Press or
q
CID
/SELECT, or enter the number using the
MENU
dialing keys.
5. Press or
q
CID
number using the dialing keys, then press
/SELECT to move on to set the time.
MENU
6. Press or
q
CID
/SELECT, or enter the number using the dialing
MENU
keys.
7. Press or
q
CID
the number using the dialing keys.
8. Press or
q
CID
/SELECT to confirm. There is a confirmation tone and the screen
Press
MENU
returns to the previous menu.
Notes: If the clock is not set when a message is recorded, the system announces, "Time and day not set," before it
plays the message.
to scroll to Set date/time and
p
DIR
/SELECT.
to select the month, then press
p
DIR
to select the day, then press
p
DIR
to select the year, or enter the
p
DIR
to select the hour, then press
p
DIR
to select the minute, then press
p
DIR
to highlight AM or PM, or press 2 for AM or 7 for PM.
p
DIR
45
to enter the
SELECT
Ringers
>Set date/time
SET DATE
MM/DD/YY
SET TIME
HH:MM --
/SELECT, or enter
MENU