Spid Registration For Customers In The Usa - Sony PCS-5100 Operating Instructions Manual

SPID Registration for Customers in the USA

2-16
Chapter 2 Settings
If the system is connected to a network switch of the following types, you
can use ISDN lines.
• Network switch type: AT&T 5ESS
• Network switch software version: 5E8 or later (for National ISDN-1 and
National ISDN-2)
or
• Network switch type: Northern Telecom (NTI) DMS-100
• Network switch software version: BCS34 or later (for National ISDN-1
and National ISDN-2)
If the system is connected to a network switch of the following types, you
can also use ISDN lines.
• Network switch type: AT&T 5ESS
• Network switch software version: 5E8 or later (for Multipoint or Point-
to-Point Custom ISDN)
or
• Network switch type: Northern Telecom (NTI) DMS-100
• Network switch software version: BCS34 or later (for Custom ISDN)
In these cases, you shall register the LDN (Local Directory Number:
seven-digit local phone number).
Follow the steps below to register the LDN(s).
1
On the SETUP menu, select LDN.
2
Use the on-screen keyboard to add the COUNTRY CODE.
If the network switch type is AT&T 5ESS (National ISDN)
COUNTRY CODE is 1
If the network switch type is NTI DMS-100 (National ISDN)
COUNTRY CODE is 1
If the network switch type is AT&T 5ESS (Multipoint Custom ISDN))
COUNTRY CODE is 1-10
If the network switch type is AT&T 5ESS (Point-to-Point Custom
ISDN)
COUNTRY CODE is 1-12
If the network switch type is NTI DMS-100 (Custom ISDN)
COUNTRY CODE is 1-11
3
Use the on-screen keyboard to add the LDNs.
If one ISDN line is used, register the LDN in entries A1 and A2.
If two ISDN lines are used, register the LDNs in entries A1, A2, B1, B2.
If three ISDN lines are used, register the LDNs in entries A1, A2, B1,
B2, C1, C2.
If the network switch type is AT&T 5ESS (National ISDN)
Each LDN is given for three channels (CH A1 and A2, CH B1 and B2,
CH C1 and C2)
or
Each LDN is different as a separate LDN is given for each channel.