Spid Setting For Customers In The Usa And Canada - Sony PCS-1 Operating Instructions Manual

Page 6/7
Shows the A1 to C2 text boxes for inputting
the telephone numbers and the Auto SPID
tab.
ISDN Setup
Page: 6/7
SPID
A1
A2
B1
B2
C1
C2
Auto SPID
SPID
This item is used only for customers in the
USA and Canada.
For details, see "SPID Setting for
Customers in the USA and Canada".
Auto SPID
This item is used only for customers in the
USA and Canada.
For details, see "SPID Setting for
Customers in the USA and Canada".
Notes
• The D1-F2 text boxes are shown on the next
page (Page 7). Fill in the boxes depending on
the lines you connect.
• The SPID menu does not appear depending
on the protocol you selected on Page 1.
52
Registering Local Information
Save Cancel
SPID Setting for Customers in
the USA and Canada
If you connect to an ISDN switch type,
configuration of SPID (Service Profile
Identifier) is required. When you select
"Auto SPID" in the ISDN Setup Wizard (see
page 31), the "Area Code", "Local Number"
and "SPID" setup items are automatically
set.
If "Auto SPID" is not available in your area,
set up SPID manually using the ISDN Setup
menu.
1
Open the ISDN Setup menu.
2
Enter the country code in the Country/
Region Code text box depending on
the network switch type you are using.
AT&T 5ESS (National ISDN), NTI
DMS-100 (National ISDN): Enter
"1".
AT&T 5ESS (Multipoint Custom
ISDN): Enter "1*10".
AT&T 5ESS (Point-to-Point Custom
ISDN): Enter "1*12".
NTI DMS-100 (Custom ISDN): Enter
"1*11".
ISDN Setup
Page: 1/7
Country/Region
Country/Region Code
Protocol
3
Open Page 2 of the ISDN Setup menu
to enter the LDN (Local Directory
Number) in the Local Number text
boxes.
When you use the AT&T 5ESS
(Multipoint Custom ISDN) or AT&T
5ESS (Point-to-Point Custom ISDN)
switch type
ISDN
USA
1
National ISDN
Save Cancel