Appendix; Location And Function Of Parts And Controls; Pcs-Pg50/Pg50P Communication Terminal - Sony IPELA PCS-G50 Operating Instructions Manual

Appendix

Location and
Function of Parts
and Controls
PCS-PG50/PG50P
Communication Terminal
Front/Right side
1 2 3
a ON LINE indicator
Blinks during dialing or answering and
lights in blue when connection is
completed. It turns off when the system
is disconnected.
b POWER/STANDBY indicator
Lights in green when the power switch is
set to on (@). Lights in orange when the
Communication Terminal is set to
standby mode.
c LAN ALERT indicator
Lights in yellow when packet error (loss) or
link error occurs during communication.
d Memory Stick slot
Insert a "Memory Stick" (not supplied)
into this slot.
e Power switch
Rear
a AUDIO OUT (MIXED) jack (phono jack)
b AUDIO OUT jack (phono jack)
4 5
c AUDIO IN AUX jack (phono jack)
d AUDIO IN LINE jack (phono jack)
e MIC1/MIC2 (PLUG IN POWER)
f VIDEO IN connector

Location and Function of Parts and Controls

Turns on/off the Communication
Terminal. The power is on when the
switch is set to the @ side and off when
the switch is set to the a side.
AUDIO OUT AUDIO IN
(MIXED)
AUX LINE MIC
(PLUG IN POWER)
1 2
DC 19.5V 1 2
IR OUT
EC-MIC RGB OUT
AUX CONTROL
1 2 CTRL-S 1 2
AUX MONITOR
VIDEO OUT
Used when recording the sound to
minute a conference. The mixed sounds
of a local and remote parties are output
from this jack.
Connect to the audio input of the TV
monitor.
Connect to the audio output of the
optional VCR or audio equipment.
Used when connecting to the optional
CTE-600 Communication Transducer or
an external microphone mixer.
jacks (minijack)
Connect to the optional PCS-A1 or
PCSA-A3 microphone. Power is
supplied to the microphone from the
Communication Terminal.
Connect to the TERMINAL connector
on the rear of the Camera.
VIDEO IN
CAMERA AUX IN
WHITE 100BASE-TX/
BOARD 10BASE-T
DSB
ISDN UNIT
209