Components And Measurement Values - Asko T700 Series Service Manual

MOTOR (2/118/JU) 50 HZ MOTOR (2/118/JU) 50 HZ
MOTOR (2/118/JU) 50 HZ MOTOR (2/118/JU) 50 HZ MOTOR (2/118/JU) 50 HZ
Part number: 80 618 24
23,8 Ω
Main winding:
Auxiliary-winding: 28,1 Ω
Voltage: 220/240 V
Current: 1,1 A, 270 W, 2850 rpm
The two-pole motor is connected directly to the
fan for internal air and via a gear to drive the drum.
On machines with condensers (T720/780) it also
drives the fan for external air.
C A P C A P C A P C A P A C I T C A P A C I T O R A C I T A C I T A C I T O R O R O R O R
Part number: 80 542 68
The capacitor is located on the motor and has a
value of 8µF.
CONDENSED W CONDENSED WA A A A A TER PUMP (T720/T780) CONDENSED W TER PUMP (T720/T780) TER PUMP (T720/T780)
CONDENSED W CONDENSED W TER PUMP (T720/T780) TER PUMP (T720/T780)
Hanning Hanning Hanning 25W 25W 25W
Hanning Hanning 25W 25W
Part number: 80 638 09
111 Ω
Resistance:
The condensation water pump pumps the water
from the condenser housing at the rear of the machine
to the water tank.
RADIO INTERFERENCE FIL RADIO INTERFERENCE FILTER RADIO INTERFERENCE FIL
RADIO INTERFERENCE FIL RADIO INTERFERENCE FIL
Part number: 80 585 58
Leakage current: 230 V/ 50 Hz 0.315 mA
The filter eliminates radio interference generated by
the machine.
INDICA INDICA TOR LAMP TOR LAMP
INDICA INDICATOR LAMP INDICA TOR LAMP TOR LAMP
Part number: 80 070 73
Current: 1.68 mA, 230 V, 50 Hz
The lamp indicates that the main power switch is
set to on.
THERMISTOR (T760/T780) THERMISTOR (T760/T780) THERMISTOR (T760/T780) THERMISTOR (T760/T780) THERMISTOR (T760/T780)
Part number: 80 619 00
Resistance: 40-60 kΩ at 20°-30°C
The thermistor controls temperature regulation. If the
thermistor becomes short-circuited or disconnected
from the control unit, the program stops.

COMPONENTS AND MEASUREMENT VALUES

C O N T C O N T
C O N T A C T C O N T C O N T
Part number:
Resistance:
The contactor opens in case of overheating, when
the door is opened and at the end of the program.
T H E R M O S T A A A A A T S T S T S T S T S T H E R M O S T T H E R M O S T
T H E R M O S T T H E R M O S T
T 7 0 0 T 7 0 0 T 7 0 0 T 7 0 0 T 7 0 0
Part number:
The thermostats are located in the fan housing. It
controls the temperatures for the automatic
programs and the time program up to 60 minutes.
The 239° F thermostat automatically disconnects
one of the heating loops if the temperature rises too
high. This thermostat is located next to the heating
element at the rear of the dryer.
T 7 2 0 T 7 2 0
T 7 2 0 T 7 2 0 T 7 2 0
Part number:
This thermostat is located in the fan housing. It
TER TER TER
TER
controls the temperature for the automatic programs
and the time program up to 60 min.
OVERHEA OVERHEA OVERHEAT PRO OVERHEA OVERHEA
Part number:
This thermostat stops the program if the
temperature rises too high. The unit has to be
manually reset. It is located next to the heating
element at the rear of the dryer.
HUMIDITY SENSOR (T760/T780) HUMIDITY SENSOR (T760/T780) HUMIDITY SENSOR (T760/T780)
HUMIDITY SENSOR (T760/T780) HUMIDITY SENSOR (T760/T780)
Part number:
The humidity sensor is used to control the drying
process. During operation the sensor output signal
is between 1 and 16 mV DC. Any other value causes
the program to stop.
OVERFILL PROTECTION (T720/780) OVERFILL PROTECTION (T720/780) OVERFILL PROTECTION (T720/780)
OVERFILL PROTECTION (T720/780) OVERFILL PROTECTION (T720/780)
Part number:
If both of the dryer containers are overfilled, the
program is stopped by a switch in the lower
container. The LED window indicates overfilling.
A C T A C T O R O R
A C T A C T O R O R O R
80 091 48
2 kΩ
Low 80 619 46 (111° F/44°C)
Normal 80 014 45 (127° F/53°C)
Overheat 80 088 07 (239° F/115° C)
Low 80 144 44 (118° F/47° C)
Normal 80 560 29 (158° F/70° C)
T PRO T PROTECTION THERMOST T PRO T PRO TECTION THERMOST TECTION THERMOST TECTION THERMOSTA A A A A T T T T T TECTION THERMOST
80 084 87 (302° F/150°C
manual)
80 618 55
80 526 43
15