Asko T700 Series Service Manual page 59

CUSTOMIZING THE PRESET PROGRAMS ON T760 AND T780
O P T I O N S O P T I O N S O P T I O N S O P T I O N S O P T I O N S
Normal
This temperature setting should be used for heavier
fabrics, such as denim, cotton, linen, etc.
Low
This temperature setting should be used for lighter,
more delicate fabrics, such as synthetics, permanent
press, acrylics, etc.
Air Fluff
This setting does not activate the heating element.
It simply circulates the air as the clothes tumble to
shake out the dust and refresh the clothes.
Buzzer
You can turn the buzzer on or off. If you turn the it
on, it will sound for three seconds when the program
is complete.
Anti-crease
This option is designed to prevent garments from
wrinkling when you're unable to remove them from
the dryer right away. When you select this option,
after the drying program is complete the drum will
continue to rotate for three seconds every minute
until the door is opened or one hour has passed. If
the buzzer is on, it will sound each time the anti-
crease program activates.
Quick Cooling
Each dry program ends with a cool-down phase.
This option reduces the cool-down time from 18
minutes to 9 minutes. Quick cooling can not be
selected with the Anti-crease option.
CHANGING THE LANGUAGE ON CHANGING THE LANGUAGE ON
CHANGING THE LANGUAGE ON CHANGING THE LANGUAGE ON CHANGING THE LANGUAGE ON
THE LED WINDOW THE LED WINDOW THE LED WINDOW
THE LED WINDOW THE LED WINDOW
There are eleven languages available for the LED
window:
! English
! French
! Spanish
! Portuguese
! Italian
! German
To change the language, follow the steps below:
1. Turn the machine off then on again.
2. Press five times in succession then press
ENTER
five times. (This must be done within 15
P1
seconds.)
3. When the Language menu displays, press an
Arrow button to advance through the menu to
the desired language.
4. Once the correct language displays, press
to program the LED window to display
ENTER
the language you selected.
CHILD- CHILD- SAFE ST CHILD- SAFE ST SAFE START SAFE ST ART ART ART
CHILD- CHILD- SAFE ST ART
As a safety measure, you can program the T760 and
T780 not to start unless the Start button is held
down for three seconds. To do this, follow the steps
below:
1. Turn the machine off then on.
2. Press five times, then press
ENTER
times. (This must be done within 15 seconds.)
3. "Delayed start" displays with "0" flashing in the
lower right corner. Press the
to toggle the display to "3."
C h i l d - S a f e M e n u B u t t o n C h i l d - S a f e M e n u B u t t o n C h i l d - S a f e M e n u B u t t o n
C h i l d - S a f e M e n u B u t t o n C h i l d - S a f e M e n u B u t t o n
Please note that when you set the child-safe Start
button, the Menu button is automatically
programmed to delay for three seconds before it
becomes active. This prevents a child from
accidentally changing the program settings.
When you want to change a program, press the Menu
button for three seconds to activate the menus. The
Menu button will work normally (without the
three-second delay) until you have completed your
changes. If it is not pressed for two minutes, it will
automatically revert back to the child-safe mode.
! Swedish
! Danish
! Norwegian
! Netherlands
! Finnish
five
P3
button
Right Arrow
59