Asko T700 Series Service Manual page 50

CHANGING WA A A A A TER T CHANGING W CHANGING W CHANGING W CHANGING W TER TANK HOUSING TER T TER T TER T
1. Pull out the water tank.
2. Remove the top cover (see page 23).
3. Remove the hoses.
4. Unscrew the two screws in the control panel and
the screws in the rear panel.
5. Push the housing back and lift it out.
6. Align the housing to its correct position.
7. Secure it to the panel and the rear panel.
8. Refit the hoses.
9. Replace the top cover. Don't forget the two star
washers for the outer screws.
10. Replace the water tank.
Water tank housing
P/N 8061880
50
ANK HOUSING ANK HOUSING ANK HOUSING ANK HOUSING
WATER TANK HOUSING (T720/780)
CHANGING THE W CHANGING THE W CHANGING THE WA A A A A TER T CHANGING THE W CHANGING THE W
H A N D L E H A N D L E
H A N D L E H A N D L E H A N D L E
1. Pull out the water tank.
2. Remove the two plastic clips on the underside
of the tank with the aid of a screwdriver.
3. Pull the handle off the tank.
4. Install the new handle by threading it through
the groove in the container. Press it to snap it
into place.
5. Refit the water tank.
Note:
It may not be necessary to change the water tank
handle when you change the control panel.
TER TANK TER T TER T TER T ANK ANK ANK ANK
Water tank
P/N 8061941