Changing The Inner Door; Changing The Door Handle - Asko T700 Series Service Manual

CHANGING THE DOOR MAGNET CHANGING THE DOOR MAGNET
CHANGING THE DOOR MAGNET CHANGING THE DOOR MAGNET CHANGING THE DOOR MAGNET
P L A P L A T E T E T E T E T E P L A
P L A P L A
1. Half unscrew the screws in the side of the front
door.
2. Door magnet: Push the door magnet upwards
and pull it outwards.
3. Escutcheon plate: Press the plate down and pull
it outwards.
4. Install a new magnet/escutcheon plate and
tighten the screws.
Door magnet complete
(includes holder)
P/N 8061878
Door magnet holder
(without magnet)
P/N 8061886

CHANGING THE DOOR HANDLE

CHANGING THE DOOR HANDLE CHANGING THE DOOR HANDLE
CHANGING THE DOOR HANDLE CHANGING THE DOOR HANDLE
1. Remove the three screws that secure the lower
hinge and twist it free, lift off the front door.
2. Unscrew the three screws that secure the handle
to the front door.
3. Align the new handle.
4. Secure the handle with the three screws.
5. Put the front door back on, keep it in position
with the aid of the door magnet, and secure the
hinge.
Door handle
P/N 8061813-0
P/N 8061813-26
Screws
P/N 8902068

CHANGING THE INNER DOOR

CHANGING THE INNER DOOR CHANGING THE INNER DOOR
CHANGING THE INNER DOOR CHANGING THE INNER DOOR
1. Remove the front door.
2. Unscrew the handle.
3. Unscrew the two screws at the side of the front
door and the three at the lower edge.
4. Lift out the inner door with the filter holder.
5. Align the new inner door to the front door.
6. Replace the screws at the sides and lower edge
of the front door.
7. Fit the handle.
8. Put the front door back on, keep it in position
with the aid of the door magnet, and secure the
hinge.
Screws
P/N 8902068
DOOR
Inner door
P/N 8061810
39