Program Time - Asko T700 Series Service Manual

UNDERST UNDERSTANDING THE LED WINDOW UNDERST ANDING THE LED WINDOW ANDING THE LED WINDOW ANDING THE LED WINDOW
UNDERST UNDERST ANDING THE LED WINDOW
The LED window is easy to read and understand. The illustration below explains what each item on the LED
window is. The LED window also displays the menus and options available when you customize the preset
programs. Refer to page xx for more details.
Program
When you press the
Power button, the display
toggles between the
program numbers and the
wash program names,
(e.g., Extra Dry, Dry, etc.)
Preset Programs
Displays the program that
is selected/running.
CUSTOMIZING THE PRESET PROGRAMS CUSTOMIZING THE PRESET PROGRAMS CUSTOMIZING THE PRESET PROGRAMS
CUSTOMIZING THE PRESET PROGRAMS CUSTOMIZING THE PRESET PROGRAMS
Below are the basic instructions for changing a preset program. The following page explains the menus and
options and how to navigate through them.
1. Press the button for the preset
program you want to change (
). The program you select will
P4
display in the lower left corner of
the LED window.
2. Press to display different
MENU
program and option settings.
3. Press the Arrows to move forward
or backward through the menu
settings.
4. Press
ENTER
selection.

PROGRAM TIME

PROGRAM TIME PROGRAM TIME
PROGRAM TIME PROGRAM TIME
The program time is calculated based upon the time
it took to dry the last load using the program
selected. The remaining drying time displayed is
roughly calculated and shown (within four minutes
after the program starts) in five-minute steps.
RESTORING A PRESET PROGRAM RESTORING A PRESET PROGRAM RESTORING A PRESET PROGRAM
RESTORING A PRESET PROGRAM RESTORING A PRESET PROGRAM
To restore a preset program to its original settings,
simply press the button for the preset program you
want to restore and hold it down while your press
. The program will revert to its original
ENTER
settings.
56
CUSTOMIZING THE PRESET PROGRAMS ON T760 AND T780
P1 P1 P1 P1 Extra Dry
P1 P1 P1 P1
P2 P2 P2 P2 Dry
P2 P2 P2 P2
P3 P3 P3 P3 Normal Dry
P3 P3 P3 P3
P4 P4 P4 P4 Iron Dry
P4 P4 P4 P4
P 1 P 1 P 1 P 1 P 2 P 2 P 2 P 2 P 3 P 3 P 3 P 3 P 4 P 4 P 4 P 4
Start
Indicates that you pressed Start
and the program is running.
P1–
to choose your
Tim e
2 3
Start Stop
Stop
Indicates that the program has
ended or that you pressed
Stop.
P 1 P 2
Start
NOTE
If you don't want to make changes in all the menu
headings, you can go on to the next heading without
changing anything. To do this, press the
button to advance to the next menu.
When you are in the Options menu, you press
to advance to the next option.
ENTER
Program Time
When you start a program, the
total time the program runs is
displayed. (See "Program Time"
below.) As the
progresses, the time remaining
displays. The program time
toggles between minutes (e.g.,
23 ) and hours (e.g., 1h ).
P 3 P 4
Stop
M e n u
program
E n t e r
MENU