Components And Measurement Values; Indication Lamp - Asko T700 Service Manual

KOMPONENTER OCH MÄTVÄRDEN
MOTOR (2/118/JU)
50 Hz
Part no.: 80 618 24
Main winding: 23,8 Ω
Auxiliary-
28,1 Ω
winding:
Voltage: 220/240 V
Current: 1,1 A, 270 W, 2850 rpm
The 2-pole motor is connected directly to the fan
for internal air, and via a gear to drive the drum.
On machines with condensers (T720/780) it also
drives the fan for external air.
CAPACITOR
Part no.: 80 542 68
The capacitor is located on the motor and has a
value of 8µF.
CONDENSATE WATER PUMP
HANNING
T720/780 25W
Part no.: 80 638 09
111 Ω
Resistance:
PLASET
T720/780 25W
Part no.: 80 565 19
101 Ω
Resistance:
The condensate water pump pumps the water
from the condenser housing to the water tank.
RADIO INTERFERENCE FILTER
Part no.: 80 585 58
Leakage current: 230 V/ 50 Hz 0.315 mA ??
The filter eliminates radio interference generated
by the machine.

COMPONENTS AND MEASUREMENT VALUES

INDICATION LAMP

Part no.: 80 070 73
Current: 1.68 mA, 230 V, 50 Hz
The lamp indicates that the main power switch is
set to on.
THERMISTOR
Part no.: 80 619 00
Resistance: 40-60 kΩ at 20°-30°C
The thermistor controls temperature regulation.
If the thermistor becomes short-circuited or dis-
connected from the control unit, the program
stops.
CONTACTOR
Part no.: 80 091 48
Resistance: 2 kΩ
The contactor opens in case of overheating, when
the door is opened and at the end of the pro-
gram.
THERMOSTAT
T700
Part no.: 80 619 46 (44°C)
Part no.: 80 014 45 (53°C)
Part no.: 80 088 07 (115°C auto.)
The thermostats are located in the fan housing,
controlling the automatic programs for 44°C and
53°C, also the time program up to 60 min. The
115°C thermostat automatically disconnects one
of the heating loops if the temperature rises too
high.
T760
Part no.: 80 144 44 (47°C)
Part no.: 80 560 29 (70°C)
The thermostats are located in the fan housing,
controlling the automatic programs for 47°C and
70°C, also the time program up to 60 min.
21