Stop Button; Preset Programs - Asko T700 Series Service Manual

T760 AND T780 CONTROL PANELS
Models T760 and T780 have ASKO's state-of-the-art EasyControl™ panel, as illustrated below. To select a
program, simply press one of the preset program buttons then press Start. Refer to "Preset Programs" on page
xx for a definition of these programs.
Power Button
Power
Indicator
Light
POWER BUTTON POWER BUTTON POWER BUTTON POWER BUTTON POWER BUTTON
The Power button turns the power to the machine
on and off. When the power is on, the power indi-
cator light glows red. The power must be on before
you can set the programs or start the machine.
ST ST ST ST START BUTT ART BUTT ART BUTTON ART BUTT ON ON ON
ART BUTT ON
This button starts the dryer. If you open the door
during a program, the dryer will stop tumbling au-
tomatically. To continue the program, close the door
and press Start.

STOP BUTTON

STOP BUTTON STOP BUTTON STOP BUTTON STOP BUTTON
Press this button for three seconds to stop a pro-
gram. If you stop the dryer this way, however, it
cancels the program in progress. You will have to
select a new program to restart.
P R O G R A M P R O G R A M P R O G R A M
P R O G R A M P R O G R A M
N U M B E R N U M B E R N U M B E R N U M B E R N U M B E R P R O G R A M P R O G R A M P R O G R A M P R O G R A M P R O G R A M
P1 Extra Dry
P2 Dry
P3 Normal Dry
P4 Iron Dry

Preset Programs

P 1 P 2 P 3
Start
Start Button
Stop Button
D E F I N I T I O N D E F I N I T I O N D E F I N I T I O N D E F I N I T I O N D E F I N I T I O N
This program is for fabrics that are particularly difficult to dry, such as
jeans with very thick seams.
This programs switches off the heating element when the laundry is dry,
but not overdry. This program switches off the heating
later than Normal dry. Experiment with these to find what suits you best.
This programs switches off the heating element when the laundry is dry,
but not overdry.
This program switches off the heating element when the laundry is still
damp enough for ironing.
P 4
Stop
M e n u
Program Selection Controls
PRESET PROGRAMS PRESET PROGRAMS
PRESET PROGRAMS PRESET PROGRAMS PRESET PROGRAMS
There are four preset programs, as defined in the
table below. To select a program, simply press one
of the program buttons and press Start. For
additional programming options, refer to the Use
and Care Guide.
With ASKO's Sensidry™ system, you need never
worry about overdrying your laundry. Just select the
proper program for the type of fabric you're drying
and Sensidry does the rest. Once you select a program,
Sensidry monitors the temperature and measures the
humidity level. When it detects the appropriate mea-
surements, it automatically shuts off the machine.
IMPORTANT
Tricot fabrics are more likely than any others to shrink.
Do not use the Extra Dry program for this material.
Stretch out the garments immediately after drying.
LED Window
E n t e r
55