Changing The Door Switch Pin - Asko T700 Series Service Manual

CHANGING THE DOOR SWITCH CHANGING THE DOOR SWITCH CHANGING THE DOOR SWITCH
CHANGING THE DOOR SWITCH CHANGING THE DOOR SWITCH
1. Remove the top cover (see page 23).
2. Bend up the protective tabs.
3. Pry off the door switch with the aid of a
screwdriver.
4. Transfer the wiring to the new door switch and
connect it.
5. Bend down the protective tabs.
6. Replace the top cover.
IMPORTANT
Fit the pin so that it projects by 1/4 inch (11 mm).
Door switch
P/N 8053107

CHANGING THE DOOR SWITCH PIN

CHANGING THE DOOR SWITCH PIN CHANGING THE DOOR SWITCH PIN CHANGING THE DOOR SWITCH PIN CHANGING THE DOOR SWITCH PIN
1. Drill a 4 mm diameter hole where the old pin
was.
2. Fit a hinge pin (Part no. 80 618 04) into the
hole.
IMPORTANT
Fit the pin so that it projects by 1/4 inch (11 mm).
Door switch pin
P/N 8061804
DOOR SWITCH
41