REMOVING THE FRONT DRUM FRAME
REMOVING THE FRONT DRUM FRAME
REMOVING THE FRONT DRUM FRAME
REMOVING THE FRONT DRUM FRAME
REMOVING THE FRONT DRUM FRAME
1. Remove the motor (see page 34).
2. T700/760: Remove the exhaust vent by
twisting it free.
3. Remove the wire bundle from the cable clamps
on the front drum frame.
4. Remove the fan housing cover (see page 33).
5. Using flat-nose pliers, take out the thermistor.
6. Open the front door.
7. Unscrew the four screws that secure the drum
frame to the front panel.
8. Lift out the drum frame.
REPLACING THE FRONT FRAME
REPLACING THE FRONT FRAME
REPLACING THE FRONT FRAME
REPLACING THE FRONT FRAME
REPLACING THE FRONT FRAME
9. Align the drum frame against the front panel.
10. Tighten the four screws that secure the drum
frame to the front panel.
11. Install the thermistor.
12. Install the fan housing cover.
13. Put the cable bundle into the cable clamps.
14. T700/760: Install the exhaust duct hook by
pressing it on to the drum frame exhaust lip.
15. Install the motor.
FRONT DRUM FRAME, FRONT SEAL, AND SUPPORT ROLLER
Front drum frame
P/N 8061820
CHANGING THE FRONT FEL
CHANGING THE FRONT FELT SEAL
CHANGING THE FRONT FEL
CHANGING THE FRONT FEL
CHANGING THE FRONT FEL
1. Remove the drum (see page 32).
2. Remove the seal.
3. Install the new seal evenly distributed around
the groove. The strip must be pressed firmly all
around the groove.
4. Replace the drum.
CHANGING THE SUPPORT ROLLER
CHANGING THE SUPPORT ROLLER
CHANGING THE SUPPORT ROLLER
CHANGING THE SUPPORT ROLLER
CHANGING THE SUPPORT ROLLER
1. Remove the front frame.
2. Unscrew the support roller.
3. Install the new support roller.
4. Replace the front frame.
Support roler
P/N 8052622
T SEAL
T SEAL
T SEAL
T SEAL
Front felt seal
P/N 8061821
37