Removing/Replacing The Drum; Changing The Drive Belt/Drum Paddles - Asko T700 Series Service Manual

REMOVING THE DRUM REMOVING THE DRUM REMOVING THE DRUM
REMOVING THE DRUM REMOVING THE DRUM
1. Remove the top cover (see page 23) and the rear
panel (see page 26).
2. T720/780: Remove the external fan housing (see
page 33).
3. Remove the special tool.
4. Remove the belt from the belt pulley.
5. Lift out the drum while taking off the belt.
Drum
P/N 8061800
REPLACING THE DRUM REPLACING THE DRUM
REPLACING THE DRUM REPLACING THE DRUM REPLACING THE DRUM
6. Feed the belt over the drum.
7. Feed the belt on to the motor shaft and over
the belt pulley.
8. Align the drum against the front frame and
install the special tool.
9. T720/780: Replace the external fan housing.
10. Replace the rear panel and top cover.
Drive belt
P/N 8061961
Idler pulley
(tension arm)
P/N 8801058
DRUM, DRIVE BELT AND DRUM PADDLES
CHANGING THE DRIVE BEL CHANGING THE DRIVE BELT T T T T CHANGING THE DRIVE BEL
CHANGING THE DRIVE BEL CHANGING THE DRIVE BEL
1. Remove the top cover (see page 23) and the rear
panel (see page 26).
2. T720/780: Remove the external fan housing
(see page 32).
3. Remove the special tool.
4. Remove the belt from the belt pulley and take
off the belt.
5. Feed the belt over the drum onto the motor
shaft and over the belt pulley.
6. Install the special tool.
7. T720/780: Replace the external fan housing.
8. Replace the rear panel and top cover.
CHANGING THE DRUM P CHANGING THE DRUM PADDLES CHANGING THE DRUM P
CHANGING THE DRUM P CHANGING THE DRUM P
1. Remove the top cover (see page 23).
2. Unscrew the five screws that secure the drum
paddles. (Rotate the drum until you can reach
the screws.)
3. Secure the new drum paddles.
WARNING WARNING WARNING
WARNING WARNING
The drum paddles must be installed in each
direction, see the illustration.
4. Replace the top cover. Don't forget the two star
washers for the outer screws.
Drum screws
P/N 8902099
ADDLES ADDLES ADDLES
ADDLES
Drum paddles
P/N 8052589
31