Asko T700 Series Service Manual page 7

ST ST ST ST STACKED INST ACKED INST ACKED INST ALLA ALLA
ACKED INST ACKED INSTALLA ALLATION ALLA
ASKO dryers can be mounted on top of any
matching ASKO washer. Mounts are supplied with
the machine.
Two metal brackets for
securing the dryer to
the washer
To install the dryer on top of the washer, follow the
steps below:
1. Remove the two outside screws (20 torx) from
the back of the washer that holds the top in
position and use them to secure the metal
brackets, as illustrated.
Washer
back
2. To ensure the dryer is correctly positioned on
top of the washer, align the plastic cups with
the front top edge of the washer.
To position the plastic cups, break off the left
tab (A) on the cup to be placed on the right
side of the washer and break off the right tab
(B) on the cup to be placed on the left side of
the washer. Put the cup in place before removing
the protective paper to get a general area where
the cups will be placed.
TION TION
TION TION
Two plastic cups to
secure the dryer legs.
Metal brackets
Plastic cups
3. Remove the protective
paper from the self-
adhesive surface beneath
the cups. Being careful
not to press the adhesive
surface against the top
of the washing machine,
use the tabs to position the cups (as illustrated)
then press them firmly into place.
4. Once the cups are in place, break off the
remaining plastic tabs.
5. Lift the dryer into
position. Raising the
front edge, push the
dryer backwards until
it engages with the
brackets on the back
of the washer.
6. Carefully lower the
front of the dryer,
making sure the feet fit
into the plastic cups.
S t a c k e d I n s t a l l a t i o n S t a c k e d I n s t a l l a t i o n S t a c k e d I n s t a l l a t i o n S t a c k e d I n s t a l l a t i o n S t a c k e d I n s t a l l a t i o n
Tumble dryer
Washer
WARNING! WARNING! WARNING! WARNING! WARNING!
Never stack a washer on top of a dryer!
INSTALLATION
Total height 67".
Adjustable to 69".
7