Asko T700 Series Service Manual page 62

APPENDIX A
FIXING CLIPS FOR LOWER COVER FIXING CLIPS FOR LOWER COVER FIXING CLIPS FOR LOWER COVER FIXING CLIPS FOR LOWER COVER FIXING CLIPS FOR LOWER COVER
To make removal of the lower cover simpler, you
can replace the screws with fixing clips. To do this,
follow the instructions below:
FEMALE FIXING CLIP FEMALE FIXING CLIP FEMALE FIXING CLIP
FEMALE FIXING CLIP FEMALE FIXING CLIP
1. Remove the lower cover (see above).
2. Squeeze the snap fasteners and push the clip into
the hole on the cover until it snaps into place.
Female fixing clip
P/N 8061927
62
MALE FIXING CLIP MALE FIXING CLIP
MALE FIXING CLIP MALE FIXING CLIP MALE FIXING CLIP
T 7 0 0 / T 7 6 0 , L e f t T 7 2 0 / T 7 8 0 : T 7 0 0 / T 7 6 0 , L e f t T 7 2 0 / T 7 8 0 : T 7 0 0 / T 7 6 0 , L e f t T 7 2 0 / T 7 8 0 :
T 7 0 0 / T 7 6 0 , L e f t T 7 2 0 / T 7 8 0 : T 7 0 0 / T 7 6 0 , L e f t T 7 2 0 / T 7 8 0 :
1. Remove the lower cover (see this page).
2. Squeeze the snap fasteners and push the clip into
the hole on the lower frame until it snaps into
place.
3. Replace the lower cover.
Male fixing clip
P/N 8061928
R i g h t T 7 2 0 / T 7 8 0 : R i g h t T 7 2 0 / T 7 8 0 :
R i g h t T 7 2 0 / T 7 8 0 : R i g h t T 7 2 0 / T 7 8 0 : R i g h t T 7 2 0 / T 7 8 0 :
1. Remove the lower cover.
2. Remove the condenser and condenser housing
(see page 48).
3. Push the clip into the hole on the lower frame
until it snaps into place.
4. Replace the condenser and condenser housing.
5. Replace the lower cover.