Sony PCS-G50 Setup Manual
Sony PCS-G50 Setup Manual

Sony PCS-G50 Setup Manual

Revolabs single channel system
Hide thumbs Also See for PCS-G50:

Advertisement

Revolabs Single Channel System — Sony PCS-G50 Setup Guide
This setup guide will guide you through the steps needed to properly connect a
Revolabs Single Channel System to a Sony PCS-G50 video codec.
It is important to carefully follow these instructions in order and completely.
Note:
Otherwise your Single Channel System and/or the video codec may not function
properly. Please read through these instructions completely before proceeding.
Contact Revolabs technical support if you have any questions.

Requirements for connecting systems:

1. Revolabs Single Channel System
2. Sony PCS-G50 video codec
3. QTY 1 07-STEMIC-PPP Line-to-Mic Adapter Cable*
4. QTY 1 Female XLR—1/8" mono male cable* (i.e. Calrad 10-144)
* Optional Items

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PCS-G50 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Sony PCS-G50

  • Page 1 Revolabs Single Channel System — Sony PCS-G50 Setup Guide This setup guide will guide you through the steps needed to properly connect a Revolabs Single Channel System to a Sony PCS-G50 video codec. It is important to carefully follow these instructions in order and completely.
  • Page 2 Single Channel System. 2. Connect a female XLR-to-1/8” cable between the male XLR connector on the 07 -STEMIC-PPP cable and the “MIC 1” port on the PCS-G50. Disregard the RCA portion of the 07-STEMIC-PPP cable. Configuring the Sony PCS-G50 Video Codec 1.

Table of Contents