How To Use "Dial/Disconnect; For Point-To-Point Videoconferences - Sony IPELA PCS-G70 Operating Instructions Manual

How to use "Dial/Disconnect"

By clicking the [Dial/Disconnect] button, you can jump to the "Dial/
Disconnect" page.

For Point-to-Point Videoconferences

To connect:
1 Enter the telephone number(s) of a remote party into the box(es): A1( to
C2) (When using a LAN, enter an IP address or a DNS name.)
2 Set the communication attribute.
3 Click the [DIAL] button.
4 The message, "Now dialing..." appears.
5 After the connection is made, the message, "Connect OK." will appear, and
the screen will return to the "Dial/Disconnect" page.
To disconnect:
1 Click the [DISCONNECT] button.
2 The message, "Now disconnecting..." appears.
3 After the disconnection is completed, the message "Disconnect OK." will
appear, and the screen will return to the "Dial/Disconnect" page.
To clear the dial number:
1 Click the [CLEAR] button.
2 The number(s) entered on this menu will be cleared and the screen will
return to the "Dial/Disconnect" page.
256
How to use "Dial/Disconnect"