PCSA-CTG70/CTG70P
Camera Unit (Optional)
Front
Rear
TERMINAL
Bottom
a Lens
b Remote sensor
Point the Remote Commander at this
sensor when operating this system.
c POWER indicator (green)
Lights when the power switch on the
Communication Terminal is set to on
and goes out when it is set to off or the
terminal is set to standby mode.
VISCA OUT
Location and Function of Parts and Controls
d Infrared sensor
Receives the infrared wireless signal
from the optional PCS-DS150/DS150P
Document Stand (Currently not
available). The received signal can be
used as an IR input.
e Microphone
Designed for directional voice detection.
Cannot be used for calls.
f TERMINAL connector
Connect to the CAMERA UNIT
connector on the Communication
Terminal.
g VISCA OUT connector
h Tripod hole
Use to attach the camera onto a tripod.
273