Standby Mode Function; Setting The Video Communication System To Standby Mode - Sony IPELA PCS-G70 Operating Instructions Manual

Standby Mode Function

To save power, the Communication Terminal will enter standby mode if you
do not operate it for a specified period of time.
When the Communication Terminal is in standby mode, the POWER indicator
lights in orange.
You can turn on the Video Communication System with any button on the
Remote Commander if it is in standby mode.
Once the Communication Terminal receives a call, the standby mode is
automatically released.
Notes
• The POWER indicator on the camera goes off when the system enters standby mode.
• If you use a Sony TV monitor with the IR repeater installed under the remote sensor,
the TV monitor will enter standby mode together with the Communication Terminal.

Setting the Video Communication System to Standby Mode

1
Display the launcher menu on the monitor screen, then press the
on the Remote Commander.
The message "Power off?" appears on the monitor screen.
2
Press the B or b button on the Remote Commander to select OK, and press
the PUSH ENTER button.
You may press the @/1 button on the Remote Commander.
The Video Communication System enters standby mode and the POWER
indicator on the Communication Terminal lights in orange. The POWER
indicator on the camera goes out.
If the IR repeater is installed in a Sony TV monitor, it will go into standby
together with the Video Communication System.
36
Turning the System On/Off
@ 1
/ button
B/b buttons and PUSH
ENTER button
POWER indicator (Not lit.)
POWER indicator (Lights orange.)
@ / 1 button